State of Washington RCW/WAC Code Update

Test 10

Course Name:  RCW/WAC Update
Quiz Number:  rwac810s
Teacher:  Gerald Newton
Teacher's Email:  electrician@electrician2.com

Student Name:    
Student Email:

No. of Questions= 10
Pass mark is - 70 %.

To submit this test, press the Submit button at the bottom of the page.


1.  Wires pulled into conduit systems are not considered concealed. All required ________________ installed in concealed raceway, cable, or flexible conduit systems must be completely installed and made up at the time of the rough-in cover inspection.
a) grounded conductors
b) ungrounded conductors
c) equipment grounding conductors
d) isolated grounding conductor
e) all of the above
2.  It is unlawful for any person, firm, partnership, corporation, or other entity to engage in, conduct, or carry on the business of installing or maintaining wires or equipment to convey electric current, or installing or maintaining equipment to be operated by electric current as it pertains to the electrical industry, without having an_____________________ issued by the department in accordance with RCW 19.28.
a) unrevoked contractor license
b) unsuspended contractor license
c) unexpired electrical contractor license
d) All of the above
3.  The _________________ must provide the inspector documentation substantiating the type of building construction and finish material rating(s) prior to any electrical inspection.
a) electrical contractor
b) installer
c) electrician
d) electrical administrator
4.  The penalty for each day for performing electrical work without having a valid certificate of competency or electrical training certificate is __________ for the first offense and ________ for the second offense.
a) $100, $250
b) $250, $500
c) $500, $1,000
5.  Power limited, Class 2, and Class 3 cables in suspended ceilings must be secured in compliance with NEC _______ that requires that they be be supported and secured every _______ and within _______ of each box, cabinet, conduit body, or other cable termination .
a) 334.30, 4.5 feet, 12 inches
b) 334.30, 5 feet, 36 inches
c) 334.30, 4 feet, 8 inches
6.  The installation of all ___________________________ must be complete in the area(s) where electrical inspection is requested.
a) structural elements
b) plumbing
c) framing and ducting
d) mechanical systems
e) all of the above
7.  If an electrical administrator or master electrician terminates his or her relationship with an electrical contractor, the contractor license is void after ____ unless a another electrical administrator or master electrician is qualified by the board.
a) 30 days
b) 60 days
c) 90 days
8.  Any _____________________________ may request a variance.
a) electrician
b) electrical administrator
c) electrical contractor
d) electrical permit holder
e) all of the above
9.  All boxes and enclosures, for Article 700 NEC systems, larger than six inches by six inches, including transfer switches, generators, and power panels for emergency systems and circuits must be permanently identified with an identification plate that is substantially _______ in color.
a) orange
b) red
c) yellow
10.  The ratio permitted for certified journeyman electricians to non certified trainees is one to one, but the ratio of certified specialty electricians to non certified trainees is one to _____ .
a) two
b) three
c) four



Go to top of quiz
© Gerald Newton